Publicité
Les langues disponibles
Les langues disponibles
• Mounting the hood on the wall:
Fig.B (considering the recommended distance from
the cooker top).
A without tightening them completely along with the plugs Fig.A.
- Hang the hood on the wall, aligning it in a horizontal position and tighten/fasten the 2 screws
A
B (Fig.A).
For the various installations use screws and screw anchors suited to the type of wall (e.g.
reinforced concrete, plasterboard, etc.). If the screws and screw anchors are provided with
•
support elements. If this is not the case, install a support structure made up from 2 by 4 inch
cross members in correspondence with the screw anchorage points.
Publicité
