Publicité
Les langues disponibles
Les langues disponibles
As drop arrester for this product, use only a combination of the Hilti retaining
strap and the Hilti tool tether #2261970.
▶ Secure the retaining strap to the installation openings for accessories.
Check that it holds securely.
▶ Secure one carabiner of the tool tether to the retaining strap and secure
the second carabiner to a load-bearing structure. Check that both
carabiners hold securely.
Comply with the operating instructions of the Hilti retaining strap
and those of the Hilti tool tether.
6
Operation
Observe the safety instructions and warnings in this documentation and on
the product.
6.1 Switching on
▶ Slide the on/off switch forward.
▶ The motor runs.
6.2 Switching off
▶ Slide the on/off switch back.
▶ The engine stops.
6.3 Setting speed stage
WARNING
Risk of injury due to change of speed stage when tool is under load.
Loss of control over the product.
▶ Change the speed stage setting only when the product is either switched
off or running under no load.
▶ Hold the product firmly by the grip while changing the speed stage
setting with the product running under no load.
The product has 6 speed stages; use the + and - buttons to select the speed
stage you want to use.
You can select a speed stage before you switch on the product or change
the speed stage while the product is running.
The LEDs show the current speed stage.
Setting with product switched off
▶ Press the + button or the - button.
▶ The indicator for speed stages is activated and shows the stage
currently selected.
14
English
5
2381016
*2381016*
Publicité
