Télécharger Imprimer la page

Sharp AR-152E N Mode D'emploi page 26

Copieur laser numerique
Masquer les pouces Voir aussi pour AR-152E N:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5
This chapter describes how to replace the toner cartridge and how to clean unit.
Be sure to use only genuine SHARP parts and supplies.
TONER CARTRIDGE REPLACEMENT
When the toner cartridge replacement required (
of the toner cartridge will be needed soon. Obtain a new cartridge. When the toner
cartridge replacement required (
replaced before copying can be resumed. Replace the toner cartridge by following
the procedure below.
During long copy run of a dark original, the start (
blink, the indicator light up, and the unit stop, even though toner is left.
The unit will feed toner up to 2 minutes and then the start (
will light up. Press the start (
1
Open the side cover while
pressing the side cover open
button.
2
Push gently on both sides of
the front cover to open the
cover.
24
MAINTENANCE
For best copying results, be sure to use only SHARP Genuine
Supplies which are designed, engineered, and tested to maximise the
life and performance of SHARP copiers. Look for the Genuine
Supplies label on the toner package.
) indicator lights up, replacement
) indicator blinks, the toner cartridge must be
) key to restart copying.
) indicator may
) indicator

Publicité

loading

Ce manuel est également adapté pour:

Ar-153e nAr-122e n