Sharp AR-152E N Mode D'emploi page 13

• Paper must be fed narrow side into the feed slot.
• Transparency film, labels, and other special purpose papers
Nota
• When copying onto transparency film, remove each copy
3
Press the tray select (
The single bypass (AR-122EN/AR-152EN)
If you insert a sheet of paper into the single bypass when multiple copies
have been set with the copy quantity setting (p.18), the copy quantity
setting will change to "0" and only one copy will be made.
Nota
1
Select copy and print settings before you begin the copy job.
For information on the copy settings, see "MAKING COPIES" (p.13)". For
information on the print settings, see the online manual or the Help file for
the printer driver, and then begin printing from the single bypass.
2
Set the paper guides to the paper width. Insert a single sheet of
copy or print paper (print face down) into the feed slot of the
single bypass.
Using copy mode
When you insert the paper, the machine will automatically draw in the paper
and begin copying.
Using printer mode
After appears in the display, wait until the Paper feed location indicator
for the single bypass illuminates and insert the paper. The machine will
automatically draw in the paper and begin printing.
must be fed individually.
promptly. Do not let copies stack up. When loading an
envelope, make sure that it is straight and flat.
) key to select the multi-bypass tray.
Print face
2
11