Publicité
Les langues disponibles
Les langues disponibles
MOVING THE APPLIANCE
1. Remove all food from inside the appliance.
2. Pull the power plug and attach it into the power plug hook at the rear or on top of the appliance.
3. Tape parts such as shelves or bins to prevent them from falling off while moving the appliance.
4. To move the appliance safely we recommend being at least two people. When transporting the
appliance over a long distance, keep the appliance in an upright position
5. After installation, connect the power plug to an outlet and turn on the device. If the unit has
been tilted during the move, we recommend that you wait at least 2-3 HOURS before
reconnecting the unit to allow the coolant to flow back to the compressor.
Caution: Hold the device from the sides or base when moving it. The appliance should not be
lifted by holding the edges.
CHANGING THE LIGHT
Replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service
agent or similar qualified person
REPAIR AND MAINTENANCE
You must call a qualified service technician for servicing. Only original parts can be used on the unit.
Under no circumstances should you try to repair the unit yourself. Repairs carried out by unqualified
persons may result in serious personal injury or equipment malfunction. Contact an authorized service
Center for all maintenance or repair services.
ABSENCES FOR LONG PERIODS OF TIME
When the refrigerator is not being used for a long period of time, we strongly recommend disconnecting
the unit, emptying it from all food and cleaning the appliance thoroughly. Leave the door ajar to avoid
odors and mildew.
WARNING: DO NOT COVER THE AIR AND RETURN AIR OUTLETS OF THE APPLIANCE.
POWER FAILURE
In the event of a power outage, even in summer, the food inside the device can be kept for several
hours. Door openings should be reduced, and you should avoid adding fresh food.
.
27
Publicité
