AVG ARBM184FSE Guide D'installation Et D'utilisation page 26

LEVELLING THE APPLIANCE
To ensure proper operation and levelling of the appliance, you may need to adjust the height of the
legs. If the unit is not levelled, the doors and gaskets will not be properly aligned. To proceed first
ensure that the legs touch the ground and then adjust the two leveling legs at the front of the unit by
loosening and tightening clockwise and counter-clockwise, as required.
FEET ADJUSTMENT
Turn the levelling feet clockwise to lift the refrigerator up;
1.
2. Turn the levelling feet counter clockwise to lower the refrigerator;
3. Adjust the right and left feet according to the above procedures until the unit is totally levelled
LEVELLING THE DOORS
1. Raise the lower door up to the level of the higher door.
2. Insert the supplied fastener-ring
lower hinge. The number of fasten-rings you will need to insert depends on the gap.
by using pliers in the gap between the hinge- grommet and the
26
Hinge
grommet
Pliers
Fastener-ring
Lower hinge