Teach Ir; Display Setup - Classe CP-500 Manuel Du Propriétaire

teach IR

The CP-500 provides discrete infrared (IR) command codes for all its functions, a list
that extends far beyond what is required by normal remote controls. However, many of
these functions are critical if you plan to create a customized remote control with macros
that take command of your entire system. Without these discrete codes, many of the
macros you might want to create will simply not work reliably.
The teach IR screen provides a scrolling list of all the available IR codes in the CP-500.
By scrolling to the command you need to learn into your macro-capable remote, and
then pressing the send IR code button, the CP-500 will send the appropriate command
code out its front panel–where it can be learned by your third-party remote control.
For more information on such control systems, we recommend you speak with your
authorized Classé dealer.

display setup

This button brings up the display setup menu. It allows you to configure the CP-500's
LCD screen brightness, the display timeout, and the language used in the touchscreen and
menu system.
28