Samsung WA40B3005A Serie Manuel D'utilisation page 52

Troubleshooting
Information codes
The washer may display information codes to help you understand what is occurring with
your washer better.
Code
Lid is open when washer is running.
Hot LED
•
Flashes
•
Warm LED Communication error between SUB PBA and MAIN PBA.
Flashes •
Eco Warm
A button is not working properly.
LED
•
Flashes
The Water Level sensor is not working properly.
Cool LED
When the Cool LED is flashing, the washer drains for 3 minutes. During this
Flashes
time, the POWER button is inoperative.
•
Your Washer has tried to fill but was unsuccessful.
When the Extra High LED is flashing, the washer drains for 3 minutes.
During this time, the POWER button is inoperative.
•
Extra
High LED
•
Flashes
•
Check if the hot water supply hose is connected.
•
Your Washer has tried to fill but has not reached the proper water level.
High LED
When the High LED is flashing, the washer drains for 3 minutes. During this
Flashes
time, the POWER button is inoperative.
•
52 English
WA40B3005AW_UM_DC68-00000A-00_EN.indd 52 WA40B3005AW_UM_DC68-00000A-00_EN.indd 52
Close the lid tightly and restart the cycle.
If the information code remains, contact a customer service center.
If the information code remains, contact a customer service center.
If the information code remains, contact a customer service center.
NOTE
If the information code remains, contact a customer service center.
NOTE
Make sure the water faucets are open all the way. Check for kinked
hoses.
Check the inlet screens on the fill hoses.
If you use a Flood Safety Device, remove the device and connect the
water hoses directly to the unit.
You must connect the hot water supply hose because hot water is
supplied by the Auto Temperature Control (A.T.C.) function.
NOTE
If the information code remains, contact a customer service center.
Meaning
2022-08-25 2022-08-25 10:19:16 10:19:16