EGAmaster EGAtronik 51252 Manuel D'instructions page 16

1
2
3
SEL/REL: press this key to switch between AC and DC modes for mV ,
positions.
HOLD/ : Press to enter or exit data hold mode. Long press over 2 seconds to turn on/
off backlight.
To avoid false reading, replace the battery if the battery low power symbol
pay special attention to the warning sign
voltage or current must no! exceed the values listed on the device.
CAPACITANCE MEASUREMEN (see Figure 2a)
1. Switch the dial to capacitance test.
2. lnsert the black test lead into the COM jack, the red test lead into the "VΩmA" jack.
Connect test leads with the in parallel.
16
STRUCTURE (see Figure 1)
Display screen
Function keys
Functional dial
KEY FUNCTIONS
OPERATIONS
4
5
6 Remaining inputs jack
Figure 1
beside the test lead jack, indicating that the tested
10A input jack
COM jack
, and REL
appears. Also