Select Cycle - Whirlpool Cabrio Guide D'utilisation Et D'entretien

7.

Select cycle

Turn cycle knob to choose
your wash cycle. Estimated
Time Remaining will light up
with a cycle time. You may
notice time adjusting during the cycle. This is normal.
If you do not want to begin a cycle immediately, you may
choose DELAY WASH option.
To choose a delay time:
1. Press DELAY WASH button to select desired delay time.
2. Press START/PAUSE.
To cancel delaying a cycle:
1. Press START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
10
8.
Select cycle modifiers
Once you select a cycle, the default modifiers for that cycle will
be lit. Press the cycle settings buttons to change the Soil Level,
Spin Speed, and Wash Temp, if desired. Not all settings are
available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added,
so this may be cooler than what
your previous washer provided.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Eco Cold
This is the temperature from
your faucet.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors
that bleed or fade
Light soils
Dark colors
that bleed or fade
Light soils