GE PGP9036 Instructions page 2

ADJUSTING LOW FLAME SETTING
ON COOKTOP BURNERS
Low setting adjustments must be made with 2 other burners
extinguished when other burners are turned on.
A. Turn on surface burners to medium setting.
B. Turn the knob on the burner being adjusted to "LO".
Round Burners
Inside shaft
shaft as shown. Turn clockwise as
far as possible while maintaining a
slowly turn adjustment screw
Center adjustment screw
for all burners except the
exists for each burner.
Multi-Ring Burner
E. Additionally, for each burner being adjusted, quickly
Multi-Ring Burner (on some models)
• Turn on burner to MED setting to Multi-Ring Burner
adjust the outer ring. Turn the outer
ring adjustment screw (in the center
Flames
the top edge of the burner cap.
• Turn on burner to SIM setting to
adjust the center ring. Turn clockwise
as far as possible while maintaining a
stable flame.
Multi-Ring Burner
Adjustment screw for outer ring
LED
LED
LED
Adjustment screw for center ring
SPECIAL NOTE:
To convert the cooktop back to natural gas, reverse the
instructions given in making propane adjustments.
NOTICE:
the propane sticker and include your name, organization
cooktop near the regulator to alert others in the future
use natural gas.
ADDITIONAL INFORMATION
PGP9036 - BURNER OUTPUT RATINGS: BTU/HR
NG (Natural) Gas 5" W.C.P.
ORIFICE SIZE
BTU RATE
BURNER
LF 9,500
LR 9,500
C 18,000
C1 N/A
C1 N/A
C1 N/A
C2 N/A
Burner Cap
RR 5,000
RF 15,000
CGP9536 - BURNER OUTPUT RATINGS: BTU/HR
NG (Natural) Gas 5" W.C.P.
ORIFICE SIZE
BTU RATE
BURNER
LF 9,500
LR 9,500
C 20,000
C1 N/A
C1 N/A
C1 N/A
C2 N/A
RR 5,000
RF 15,000
198 Denotes 1.98mm Orifice size opening
N Denotes Natural Gas
III
(mm) MARKING
1.33 133N
1.33 133N
1.04 104N
1.04 104N
1.04 104N
0.63 63N
0.97 97N
1.73 173N
(mm) MARKING
1.33 133N
1.33 133N
1.1 110N
1.1 110N
1.1 110N
0.63 63N
0.97 97N
1.73 173N
PROPANE CONVERSION INSTRUCTIONS
31-2001100 Rev. 0 04-22 GEA
PGP9036, CGP9536