Auto Tuning; Manual Tuning - Denon DRA-685 Mode D'emploi

Auto tuning

4 1 2 3
B

Manual tuning

1
Set the input function to "TUNER".
2
Watching the display, press the BAND button to select the
desired band (AM or FM).
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO" indicator turns off.
1 Set the input function to "TUNER".
2 Watching the display, press the BAND
button to select the desired band (AM or
FM).
3 Press the MODE button to set the auto
tuning mode.
Lit
AUTO CH
TUNED
4 Press the TUNING UP or
DOWN button.
• Automatic searching begins, then stops when a station is
tuned in.
NOTE:
• When in the auto tuning mode on the FM band, the "STEREO"
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the "TUNED" and
"STEREO" indicators turn off.
3
Press the MODE button to set the manual tuning mode. Check
that the display's "AUTO" indicator turns off.
4
Press the TUNING UP or DOWN button to tune in the desired
station.
The frequency changes continuously when the button is held
in.
ENGLISH
TUNER
BAND
MODE
TUNER
TUNING
DOWN UP
25