Publicité
Les langues disponibles
Les langues disponibles
9.
14 Snooze function
1.
2.
15 Temperature alarm setting
1.
2.
3.
4.
5.
6.
7.
36 / 80
Press SET button again to disable the alarm. The sym-
bol will not be displayed. The alarm is disabled.
When the alarm sounds, press SNZ button to activate
the snooze function. The alarm will sound again in 5
minutes.
Press any other button when the alarm sounds to inter-
rupt the alarm until the alarm time will be reached
again.
In normal time display mode, press DOWN button for
approx. 2 seconds to enter temperature alarm time set-
ting mode.
Digits to be set are flashing.
Settings order: ON/OFF (Temperature alarm on/off) >
Temperature highest limit > Temperature lowest limit >
Exit
Press UP or DOWN button to change the value.
Press SET button to confirm and continue to the next
setting.
The temperature settings mode will be quit automatic-
ally after 30 seconds of inactivity. All settings done be-
fore will be saved.
When outdoor temperature reaches highest or lowest
limit, the temperature alarm symbol will flash and an
alarm will sound for approx. 3 seonds. This will be re-
peated with an interval of 1 minute until the temperat-
ure has fallen below the limit again.
Publicité
