Full Mode (*); Ext Out; Install Menu; Program - Finlux 32FLHD845 Manuel De L'utilisateur

Full Mode (*)

If you connect a device via HDMI or YPbPr
connectors and set 1080i/1080P resolutions,
Full Mode item will be visible.You can set Full
Mode as 1:1 or Normal by using "sola cursor
ikonu" or "sağa cursor ikonu".If you select 1:1,
screen ratio will be adjusted correctly. If you set
Normal, screen ratio may expand.
(*) Only for Full HD models.

Ext Out

Press " " or " " button to select Ext Out. Use "
" or " " button to set the Ext Out as On or Off.
Note :
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
"On" to EXT Out from feature menu.

Install Menu

Program

Press " " or " " button to select Program. Use
" " or " " button to select the program number.
You can also enter a number using the numeric
buttons on the remote control. There are 200
programme storage between 0 and 199.

Band

Band can be selected either C or S. Press " "
or " " button to set Band.

Channel

Channel can be changed by " " or " " button
or numeric buttons.

Colour System

Press " " or " " button to select Colour System.
Use " " or " " button to change the colour
system to PAL, PAL 60, SECAM or AUTO.

Sound System

Press " " or " " button to select Sound System.
Press " " or " " button to change the sound
system to BG,DK, I, L or L'.

Fine Tune

Press " " or " " button to select Fine Tune.
Press " " or " " button to adjust the tuning.

Search

Press " " or " " button to select Search. Use "
" or " " button to start programme searching.
You can also enter the desired frequency
using the numeric buttons while Search item
is highlighted.

Store

Press " " or " " button to select Store. Press "
" or OK button to store the settings. " Stored... "
will be displayed on the screen.

Install Menu in AV Modes

The following screen appears in the install menu
when the TV is in AV modes. Note that limited
options will be available. Switch to TV mode for
viewing complete version of the Install menu.
Colour System
Press " " or " " button to select Colour
System . Use " " or " " button to change the
colour system to PAL , SECAM , PAL 60 or
AUTO .
Store
Press " " or " " button to select Store
Program . Press " " or OK button to store the
settings. " Stored... " will be displayed on the
screen.
English - 45 -