Confi Guration; Ac3 Audio; Country Options Only); Hard Of Hearing (**For Continental Europe Country Options Only) - Finlux 32FLHD845 Manuel De L'utilisateur

Confi guration
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK
to view this menu. Press the EXIT button on the
remote control to exit.
AC3 Audio (**for continental Europe country
options only)
In the Confi guration Menu, highlight the AC3
Audio item by pressing " " or " " buttons. Use
the " " or " " buttons to set the AC3 Audio as
On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.
Hard of Hearing (**for continental Europe

country options only)

Use " " or " " button to select Hard of Hearing
and then press " " or " " button to set this
setting as On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.

Favourite Mode

Use this function to enable or disable favourite
mode. Press " " or " " button to set this function
as on or off.

Broadcast Type

When you set the desired broadcast type by
using " " or " " button, the TV will display the
related channel list. If the related source has
does not include any stored channels, "No
channels for this type have been found."
message will be displayed on the screen.

Channel List

Use " " or " " buttons to go to Channel List
option. Use " " or " " buttons to toggle Channel
List Mode. If you select "TV Only", with the "
" or " " buttons, you navigate through only TV
channels. If you select "Radio Only", with the " "
or " " buttons, you navigate through only radio
channels. If you select "Text Only", with the " "
or " " buttons, you navigate through only text
channels. To save the recent changes and exit;
press the "M" button.

Active Antenna

Use " " or " " buttons to highlight Active
Antenna option.
When antenna power option is set as On
by pressing " " or " " button, +5V will be
transmitted to the antenna output.
This feature enables the use of active
antenna.
Note: Antenna power should be "Off" when standard
antenna is used instead of the active antenna.

Scan Encrypted

Scan Encrypted Channel feature will always be
ON after performing first time installation. When
this setting is on, search process will locate the
encrypted channels as well. If it is set as OFF
manually, encrypted channels will not be located
while in automatic search or manual search.
Use " " or " " button to select Scan Encrypted
and then press " " or " " button to set this
setting as On or Off.

Receiver Upgrade

Over Air Download (OAD)

To ensure that your TV always has the most
update information, use this setting. Please
ensure that the TV is set to standby mode. The
TV automatically powers up at 3.00 A.M. each
day and searches for any new information which
may be broadcast and will download this to
your receiver automatically. This operation will
normally take approximately 30 minutes. If you
have an important recording to be carried out
at 3.00 A.M. and you do not want to interrupt
it, disable auto OAD search by performing the
following:
• Press "M" button and using the " " or " "
buttons to choose Setup and press the OK
button.
English - 30 -