Functional Description; Intended Use; Product Features - Bosch PSR 14,4 LI-2 Notice Originale

Masquer les pouces Voir aussi pour PSR 14,4 LI-2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Switch off the power tool immediately
when the tool insert jams. Be prepared for
high reaction torque that can cause kick-
back. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
Hold the machine with a firm grip. High re-
action torque can briefly occur while driving
in and loosening screws.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
also against continuous sun irradia-
tion and fire. There is danger of explo-
sion.
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Use the battery only in conjunction with
your Bosch power tool. This measure alone
protects the battery against dangerous over-
load.
Bosch Power Tools

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramic and plastic.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Screwdriver bit*
2 Keyless chuck
3 Torque preselection ring
4 Gear selector
5 Indicator for right rotation
6 Indicator for left rotation
7 Battery*
8 "Power Light"
9 Battery charge-control indicator
10 Rotational direction switch
11 On/Off switch
12 Battery unlocking button
13 Universal bit holder*
14 Securing screw for keyless chuck
15 Allen key*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
English | 17
2 609 003 396 | (5.12.08)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Psr 18 li-2Psb 14,4 li-2Psb 18 li-2Psr 14,4 li

Table des Matières