GE OPAL 2.0 Manuel D'utilisation page 8

Care and Cleaning
System Descaling / Sanitizing Procedure
(continued)
8. Continued
•
below.
• Clean the sensors with vinegar and wipe clean with
the sensors. Appearance may vary based on model.
Opal.
10. Unhook the top of the drain hoses at the back of the unit.
11. Then lay them down to drain into a sink or bucket that is
the reservoir each time (you may continue to repeat the
rinse cycle, for as many times as you like).
17. When complete, fill unit with fresh water and press the
8
Pull to the left to unhook
Clean Light Power
Hold 3 Sec
49-1000464 Rev. 9