Cafe C2Y366 Instructions D'installation page 5

PRODUCT DIMENSIONS AND CLEARANCES
36" Range Models
Width
Front of Bullnose
Height to trim.
Trim to be flush
or higher than
countertop.
Front of Door
WARNING
Installations without a
horizontal combustible surfaces must have
an Auto-On feature. Refer to hood installation
instructions for specific hood clearances.
The surface of the entire back wall above
the range and below the hood must be
covered with a non-combustible material
other stone.
CAUTION
To prevent drafts from
in floor under appliance and behind
appliance wall.
** As defined in the National Fuel Gas Code (ANSI
from non-combustible materials are not part of the
ADDITIONAL CLEARANCES:
each side.
Working areas adjacent to the rangetop should have
bottom of the wall cabinet.
cutout to back edge of countertop and 3 in. minimum
from cutout to side edges of countertop (see top view).
31-2000815 Rev. 1
Design Information
Countertop
to Cooking
Surface
leg Height
Universal Utility Locations
Electric
Electric
Minimum
to Combustibles
Non-
Min.
Combustible
Material **
Minimum
Each Side
Back
Island
Cutout
Top View
to Adjacent Wall
5