Publicité
Les langues disponibles
Les langues disponibles
General Safety Rules – For All Battery
Operated Tools
WARNING! Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• A battery operated tool with integral batteries or a separate
battery pack must be recharged only with the specified
charger for the battery. A charger that may be suitable for one
type of battery may create a risk of fire when used with another
battery.
• Use battery operated tool only with the specifically designed
battery pack. Use of any other batteries may create a risk of fire.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in
serious personal injury,
• Dress properly. Do not wear loose clothing or jewelry. Contain
long hair. Keep your hair, clothing, and gloves away from moving
parts. Loose clothing, jewelry, or long hair can be caught in moving
parts. Air vents often cover moving parts and should also be avoided.
All manuals and user guides at all-guides.com
• Avoid accidental starting. Be sure switch is in the locked or off
• Remove adjusting keys or switches before turning the tool on.
• Do not overreach. Keep proper footing and balance at all times.
• Use safety equipment. Always wear eye protection. Dust mask,
TOOL USE AND CARE
• Use clamps or other practical way to secure and support the
• Do not force tool. Use the correct tool for your application. The
• Do not use tool if switch does not turn it on or off. Any tool
• Disconnect battery pack from tool or place the switch in the
• Store idle tools out of reach of children and other untrained
• When battery pack is not in use, keep it away from other metal
position before inserting battery pack. Carrying tools with your
finger on the switch or inserting the battery pack into a tool with
the switch on invites accidents.
A wrench or key that is left attached to a rotating part of the tool
may result in personal injury.
Proper footing and balance enables better control of the tool in
unexpected situations.
non-skid safety shoes, hard hat, or hearing protection must be
used for appropriate conditions.
workpiece to a stable platform. Holding the work by hand or
against your body is unstable and may lead to a loss of control.
correct tool will do the job better and safer and the rate for which it
is designed.
that cannot be controlled with the switch is dangerous and must be
repaired.
locked or off position before making any adjustments,
changing accessories, or storing the tool. Such preventative
safety measures reduce the risk of starting the tool accidentally.
persons. Tools are dangerous in the hands of untrained users.
objects like: paper clips, coins, keys, nails, screws, or other
small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may
cause sparks, burns, or a fire.
Publicité
