AGV GP-Tech Mode D'emploi page 12

3) INNERS
The crown pad, right and left cheek pads, neck roll and wind shield are removable and washable. To remove
and install the inners, follow the instructions and observe the figures below. To wash the inners, please see the
"Safety Warning" booklet.
1
1
12
All manuals and user guides at all-guides.com
2.3) Nose guard removal/installation
On the Gp-tech, the nose guard can be removed, gently extracting it
from its housing.
hooks and check that it is fastened securely into its housing.
Crown pad
Right cheek pad
Left cheek pad
Neck roll
Chin curtain
2
2
To refit it, insert the plastic teeth into the appropriate
3.1) Cheek pad removal/instal-
lation
To remove the cheek pads, grip
them at the front near the helmet
chin strap and pull in the direction
of the arrow to free them from the
press studs (1). Remove the
cheek pads, passing the closing
strap through the holes and ex-
tracting them (2).
To refit the cheek pads, slide them
into the helmet, slotting the strap
CLICK !
into the appropriate hole (1) and
pressing the press studs in place
(2). Check that the cheek pads
are perfectly secured to the hel-
met.