AGV GP-Tech Mode D'emploi page 11

1
3
2) VENTILATION SYSTEM
Open
Closed
All manuals and user guides at all-guides.com
2
4
Channels through polystyrene
Upper air extractors
Central air extractor
Lower air extractors
2.1) Opening/closing front air inlets
To open or close the air inlets, move the cursor until it clicks into position.
2.2) Opening/closing chin vent
The cursor of the chin vent has 3 positions:
1. central: air vent closed
2. lower: air vent open
3. upper: air vent open and visor micro-opening for fast elimination of conden-
sation.
NB We recommend that you use position 3 of the air vent (anti-conden-
sation function) only at low speeds and for reduced periods of time.
Front air vents
Chin vents
Cursor
1.3) Tear-Off Assembly and Adjustment
Remove the opaque protective film
from both sides of the visor, taking care
not to touch the film with your finger tips
(1). Insert the film over the pawl on the
left side of the visor (2). Insert the film
over the pawl on the right side of the vi-
sor (3) and twist it until the Tear-Off film
adheres perfectly to the visor (4).
NB Caution! Tear-Off visors are des-
tined for use in competition only. Do
not use on road. Do not apply more
than one Tear-Off film at a time to
avoid optical distortion and reduced
vision.
NB To facilitate removal during use,
fold the end of the film at 90°. To
avoid vibration at high speed, apply
clear sticky tape to the upper and
lower sides of the Tear-Off.
11