Télécharger Imprimer la page

TensCare KneeStim Instructions D'utilisation page 3

Publicité

Les langues disponibles

Les langues disponibles

Conductive Garment for use with TensCare TENS & EMS units.
For single patient use only.
Universal size, supplied with adapter lead.
Supplied with one pack of two reference electrode pads (50 x 90 mm
electrodes).
TensCare have altered the specification of the KneeStim to improve performance:
We have changed the fabric to a higher silver content to give improved
contact.
We now supply self-adhesive reference electrodes, to give a more reliable
current distribution.
Instructions for Use
1.
Ensure that the stimulator is turned OFF.
2.
Insert one pin connector (from one lead pair) into the connector attached to
the KneeStim, and the other (from the same lead pair) into the connector on
the electrode pad.
3.
The KneeStim should be worn slightly damp to improve current flow.
4.
Apply the garment
5.
Place the electrode pad on the same limb as the KneeStim.
6.
If necessary, hand wash the KneeStim and dry flat at room temperature.
Caution
If being used for pain management for Diabetic Neuropathy or other conditions
where there is reduced or no sensory sensation then there is a small risk that
reduced or uneven electrical contact may cause irritated or broken skin. Care
needs to be taken to monitor the skin condition under the garment at frequent
intervals.
1

Publicité

loading