Cisco Linksys Compact Wireless-G WRT54GC Mode D'emploi page 565

Bredbandsrouter Kompakt trådlös-G
Italy
This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table
for Italy. Unless operating within the boundaries of the owner's property, the use of this 2.4 GHz Wireless LAN product
requires a 'general authorization'. Please check with http://www.comunicazioni.it/it/ for more details.
Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle
frequenze in Italia. Se non viene installato all'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN a 2.4 GHz richiede
una "Autorizzazione Generale". Consultare http://www.comunicazioni.it/it/ per maggiori dettagli.
Product Usage Restrictions
This product is designed for indoor usage only. Outdoor usage is not recommended.
This product is designed for use with the included integral or external (dedicated) antenna(s). Use of non-dedicated or
third-party antenna(s) is not recommended and is not supported by Linksys.
Power Output of Your Device
To comply with your country's regulations, you may have to change the power output of your wireless device. Proceed to
the appropriate section for your device.
Note: The power output setting may not be available on all wireless products.
For more information, refer to the documentation on your product's CD or at
http://www.linksys.com/international.
Wireless Adapters
Wireless adapters have the power output set to 100% by default. Maximum power output on each adapter does not exceed
20 dBm (100 mW); it is generally 18 dBm (64 mW) or below. If you need to alter your wireless adapter's power output,
follow the appropriate instructions for your computer's Windows operating system:
Bilaga I: Bestämmelser
All manuals and user guides at all-guides.com
80