Kohler K-3082 Guide D'installation page 4

Before You Begin (cont.)
• (3) top clips
• (2) connecting blocks
• (6) polyset anchors
• (6) #10 x 2" screws
• (10) #10 x 1/2" screws
• (15) screw dome caps
• (16) shelf clips
• (50) shelf plugs
Models K-3082, K-3083, K-3089, and K-3090 do not include end
caps. You need a separate end cap kit for these models.
Make sure electrical power can be provided before beginning the
installation. Power to the cabinets should not be controlled by the
light switch.
The installation must have a Class A Ground-Fault
Circuit-Interrupter (GFCI). The GFCI protects against
line-to-ground shock hazard. Use a 120 V, 20 A, service.
Do not complete the finished wall until all needed plumbing and
electrical rough-ins have been completed.
Observe all local plumbing and building codes.
1010988-2-C
All manuals and user guides at all-guides.com
4 Kohler Co.