Panasonic WV-LD1500 Mode D'emploi page 16

4. Move the cursor to AUTO by pressing the C or D button. Then, press the MENU button. The picture display position will
be adjusted automatically.
Manual adjustment
If picture display position is not properly adjusted, move the cursor to the desired setting item by pressing the C or D but-
ton. Then, adjust the levels by pressing the + or – button.
Setting item
H.POSITION
V.POSITION
5. To return to the top menu, move the cursor to EXIT by pressing the C or D button. Then, press the MENU button.
6. After returning to the top menu, move the cursor to EXIT by pressing the C or D button. Then, press the MENU button.
The monitor display return to the default status.
Notes:
• If no operation has been performed for 10 seconds or more, the monitor display returns to the default status.
• Check if the VGA output setting has been performed for the connected PC.
• Depending on the connected PC, the VIDEO ADJUST menu can be controlled from the PC keyboard. However, proper
adjustment is not supported.
When connecting Digital Disk Recorder WJ-HD300 Series
When the PC IN of this monitor is connected to the MONITOR (VGA) of Digital Disk Recorder WJ-HD300 Series, picture display
position may not be properly adjusted even after you perform auto adjustment. In this case, perform "Manual adjustment" in
Step 4.
16
All manuals and user guides at all-guides.com
Effect
+: Moves rightward.
–: Moves leftward.
+: Moves upward.
–: Moves downward.
Setting value
– 20 to + 20
– 20 to + 20