i-tec C31DUALDPDOCKPD Mode D'emploi page 5

i-tec USB-C Dual DP Display Dock with PD 100 W Quick Start
SYSTEM REQUIREMENTS
5K resolution is only supported if your laptop's USB-C/Thunderbolt™ 3
Hardware Requirements: Device with a free USB-C or Thunderbolt port connector supports DisplayPort 1.4 DSC.
Requirements for Power Delivery feature: device with a free USB-C
or Thunderbolt 3 port with Power Delivery support.
Operating system: Windows 10, macOS and Linux with the latest updates
*
macOS does not support Multi Stream Transport (MST) technology.
*
Connecting two monitors to the station on macOS will result in both
monitors showing the same image.
DRIVER INSTALLATION
Windows 10 32/64bit: After connection, the drivers for the docking
station are installed automatically on the system. Before installation
make sure that your system has installed the latest drivers for your
device and updated BIOS. - 1 monitor connected via DisplayPort/HDMI cable
- resolution up to 4K 3840x2160/60Hz.
macOS X: Installation of the drivers in macOS X is automatic. Before
installation make sure that your Mac has installed the latest OS for your 4K/60Hz resolution is only supported if your laptop's USB-C/
device. Thunderbolt™ 3 connector supports DisplayPort 1.4 DSC or DisplayPort 1.4
without DSC.
CONNECTING A DISPLAYPORT MONITOR
If the USB-C/Thunderbolt™ 3 only supports DisplayPort 1.2,
The docking station is fitted with 2x DisplayPorts for connecting external the maximum resolution is 4K 3840x2160/30Hz.
monitors to a DisplayPort interface. Modern plasma, or LCD monitors
and TVs, will serve as the perfect display device of choice. The graphics
chip at the heart of the docking station supports up to 5x K 5120x2880
resolution @60Hz. Connect the monitor to the docking station using a
high-quality HDMI cable. The screen of your laptop, Mac, tablet or PC
may flash while installing the external monitor - this is normal.
- 2 monitors connected via DisplayPort/HDMI cables
- resolution up to 4K 3840x2160/60Hz.
Only if your laptop's USB-C/Thunderbolt™ 3 connector supports
- 1 monitor connected via 2 DisplayPort cables DisplayPort 1.4 DSC.
- resolution up to 5K 5120x2880/60Hz.
8 | ENGLISH ENGLISH | 9
ENGLISH