Camera Setup; Activity Camera Setup - Dedicated Micros SPRITE LITE Guide D'installation

Camera Setup

This menu detects if a camera is present and allows the installer to configure camera related
parameters. Press the required camera key to display the cameras properties.
Camera Setup Camera XX
Title
Camera termination Off
Camera type
Alarm input
Camera XX
The currently selected camera number is displayed, along with its status – detected or
not detected.
Title
Each camera title can be up to 12 characters long.
To change the camera title:
Use to scroll through the characters and
next character.
Tip: Press and hold either or to quickly scroll through the characters.
Camera termination
If cameras are to be connected to other equipment using the 'loop-through' connectors
ensure the camera termination is set to Off. The default setting is On.
Camera type
The type of camera – monochrome or colour – is automatically detected. If the type of
camera is not detected correctly, the camera type can be set to mono or colour manually.
Alarm input
Each alarm connection on the Sprite Lite needs to be configured as normally open,
normally closed, or off. The alarm contacts are labelled by the manufacturer as being
normally open or normally closed.
Detected
CAMERA XX
On
Auto Mono, Colour
Normally Open Normally closed, Off
to select the previous or

Activity Camera Setup

Activity detection is used to record more images to tape from cameras that have activity.
The sensitivity of activity can be adjusted and areas can be masked off according to the
scene type. When activity is detected the standard settings are:
• Interleave recording.
• Relay 2 closes for activity detection.
• 2 second activity dwell.
This menu is used to configure activity detection parameters for each camera input. Press
the required camera key to configure the camera's settings.
Activity Camera Setup Detection Off
Sensitivity Indoor high
Activity grid Setup
Activity test Walk test
Detection
By default, activity detection is off for each camera. Press the camera key and use
to turn activity on or off for the selected camera.
Sensitivity
This option is used to set up the level of movement required to trigger activity detection.
Sprite Lite has 5 levels of sensitivity for activity detection, select the level which is suited to
the camera's positioning. For example, external cameras may need to have a sensitivity of
either Outdoor high or Outdoor low to allow for variations in light conditions and natural
movement, such as trees.
Activity grid
Sprite Lite has an 8 by 16 activity detection grid, which can be adapted to produce a mask
for each camera. Moving into this field automatically brings up the instructions for setting
up the activity grid.
• Press mode key to enter the activity grid set-up.
• Use the cursor keys to highlight a block and press a camera key to add or remove each
block. A highlighted block means that activity will be detected in that area.
• Press mode key to return to the menu above.
Activity test
This option is used to test the sensitivity and activity grid set-up. Use this option to tune the
activity detection system for each camera. Moving into this field will display the selected
camera full screen, with visual indication of the activity detected.
On
Indoor low, Outdoor high,
Outdoor low, Very low
or
9