Hama 00049253 Mode D'emploi page 13

d Bedienungsanleitung
After Windows XP has fi nished booting, the
Found new hardware Wizzard appears and
asks you whether Windows can connect to
the Internet to search for a suitable driver
with Windows Update. Select the option
-> „No, not this time" and click -> Next
to continue installation. The Hardware
Wizard identifi es the controller as a „RAID
controller". Select the option Install from a
list or specifi c lacation (Advanced). Click
-> Next. Now insert the supplied driver CD.
Should a window appear with the question
What do wou want the wizard to do? Choose
the option „Do not carry out any action" and
click -> OK.
In the „Search and installation options"
window, only choose „Search removable
media (diskette, CD....)" -> Next. The card
is now recognised as a „Silicon Image SiL
0680 Ultra-133 Medley ATA RAID Controller".
If this message appears – „The software
you are installing for this hardware: Silicon
Image SiL 0680 Ultra-133 Medley ATA RAID
Controller has not passed the Windows logo
test that checks compatibility with Windows
XP", click on „Continue installation". Win-
dows now copies the required fi les from the
CD. Click -> Finish.
You can check whether the controller has
been installed successfully under Start ->
Control Panel -> Performance and Main-
tenance -> System -> Hardware -> Device
Manager. The following entry should appear
without a yellow exclamation mark.
SCSI and RAID controller
• Silicon Image SiL 0680 Ultra-133 Medley
ATA RAID Controller
Note: We strongly recommend that Windows
XP users at least install the latest Service
Pack to benefi t from enhancements and
improved functionality.
12
00049253bda.indd Abs1:12 00049253bda.indd Abs1:12
All manuals and user guides at all-guides.com
Installation on Windows XP x64bit
Preparation:
Ensure that your user account has admini-
stration privileges for Windows XP, otherwise
the driver installation may not be successful.
After Windows XP has fi nished booting, the
Found new hardware Wizzard appears and
asks you whether Windows can connect to
the Internet to search for a suitable driver
with Windows Update. Select the option
-> „No, not this time" and click -> Next to
continue installation. The Hardware Wizard
identifi es the controller as a „RAID con-
troller". Select the option „Install software
from a list or specifi c location (for advanced
users)". Click -> Next. Now insert the sup-
plied driver CD. Should a window appear with
the question What do wou want the wizard to
do? Choose the option „Do not carry out any
action" and click -> OK.
In the „Search and installation options"
window, only choose „Search removable
media (diskette, CD....)" -> Next. The card is
now recognised as a „Silicon Image SiL 0680
ATA/133 RAID Controller". If this message
appears – „The software you are installing
for this hardware: Silicon Image SiL 0680
ATA/133 RAID Controller has not passed the
Windows logo test that checks compatibi-
lity with Windows XP", click on „Continue
installation". Windows now copies the
required fi les from the CD. Click -> Finish.
You can check whether the controller has
been installed successfully under Start ->
Control Panel -> Performance and Main-
tenance -> System -> Hardware -> Device
Manager. The following entry should appear
without a yellow exclamation mark.
SCSI and RAID controllers
• Silicon Image SiL 0680 ATA/133 RAID
Controller
30.07.2007 10:53:51 Uhr 30.07.2007 10:53:51 Uhr