AEG BSS 4830 Mode D'emploi page 32

English
32
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Use the MODE button to select Bluetooth mode.
The device will beep several times and the BT indica-
tor lamp (1) will flash blue. This indicates that the unit
is in pairing mode.
3. Chose the Bluetooth menu in your player and
register the device in your player. For this, refer to the
operation manual of your player. The device "AEG
BSS 4830" will show in your player as a selection.
NOTE:
• Only one playback unit can be connected to
the speaker. If the speaker is already connected
to another playback unit, the speaker will not
appear in the BT selection menu.
• In case of problems with connection of the
devices: Press the
seconds to switch the unit again to pairing
mode. Now try again to connect the devices.
• If no compatible Bluetooth device can be
recognized within approx. 5 minutes, the device
will automatically switch to standby mode.
4. Now enter the password "0000" in your player,
depending on the device manufacturers, model, and
software version.
When the pairing was successful, a beep can be heard and
the indicator lamp (1) lights blue.
For the further procedure, please refer to the user manual
of the playback unit. If possible, adjust the volume of the
external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In the case of problems with the pairing of a playback
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
button (7) for about 3
NOTE:
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. There is
no sound output via speaker though. Once you have
finished your call, both devices will be reconnected and
playback will continue.
USB port
This device has been developed according to the current
level of technology in the USB sector. However, the large
variety of different USB storage media of all kinds being
offered today makes it impossible for us to guarantee full
compatibility with all USB storage media. Because of this, in
rare cases there may be problems with playback from USB
storage media. This is not a malfunction of the device.
1. Flip the rubberized cover (10) open.
2. Press the MODE button (9) repeatedly, until the USB
indicator lamp (3) lights up.
3. Connect a USB storage medium directly. Then the play-
back starts.
Refer to the section "Description of the USB / Bluetooth
Operation Buttons" for operation.
Keep the rubberized cover closed when not in use.
NOTE:
• Always connect a USB storage medium directly to the
USB port to prevent problems.
• This USB port cannot be used to charge external
devices.
CAUTION:
Before you remove the USB storage medium, use the
MODE button to switch the unit to a different mode.
Description of the USB / Bluetooth
Operation Buttons
(7)
• Press the button briefly to interrupt the playback. Pressing
the button again continues the playback from the same
position.
NOTE: Bluetooth music playback
Your playback device must support this function. De-
pending on the device, it may be necessary to start the
music app in advance on your playback device.
• Keep the button pressed to separate an existing Blue-
tooth connection or to activate the pairing mode manu-
ally.