Fiamma CARRY-BIKE MOTOR LIFT 77 Instructions De Montage Et Mode D'emploi page 11

8
fuse
T8A 250V
Once the electrical connections have been made, it is advisable to carry out a general function test by
EN
holding down the button for raising and lowering the rail support base, checking that the symbols on
the button correspond.
If pressing the button does not trigger the movements, check the connection of all cables and contact
service if necessary.
WARNING: the product is not equipped with an automatic stop system, so when the moving part of
the structure is close to the fi xed structure during closing, the button must be released (to prevent the
two structures from interfering).
During the closing movement, check that there are no elements (hands, objects, etc.) obstructing the
movement.
fuse
-
+
-
+
-
+
V
CARRY-BIKE
11