Télécharger Imprimer la page

Philips FastCare GC7700 Serie Manuel D'utilisation page 9

Masquer les pouces Voir aussi pour FastCare GC7700 Serie:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Problem
Possible cause
The appliance has
The safety auto-off function was
switched off.
activated. This happens
automatically when the steam
generator has not been used or
the steam trigger has not been
pressed for more than 15
minutes.
The appliance
The water tank is empty.
produces a loud
pumping sound.
Water droplets
After the Calc-Clean process,
come out of the
remaining water may drip out of
soleplate.
the soleplate.
The Calc-Clean process has not
been completed.
Dirty water and
Impurities or chemicals present
impurities come
in the water have deposited in
out of the
the steam vents and/or soleplate.
soleplate.
Water flushes out
You have accidentally started the
of the soleplate.
Calc-Clean process (see chapter
'IMPORTANT - Cleaning and
maintenance').
The Calc-Clean
You have not set the
process does not
temperature dial to Calc-Clean
start.
or you have not waited for the
iron to heat up.
You have not pressed the Calc-
Clean button for 2 seconds until
the appliance started beeping.
There are water
Water comes from the water
droplets visible in
path between the water tank
the appliance
and stand. This is normal.
when I detach the
water tank.
All manuals and user guides at all-guides.com
Solution
Set the on/off switch to 'off ' position and
then to 'on' position.
Fill the water tank with water and press
the steam trigger until the pumping
sound becomes softer and steam comes
out of the soleplate.
Wipe the soleplate dry with a piece of
cloth. If the Calc-Clean light still flashes
and the appliance still beeps, perform the
Calc-Clean process (see chapter
'IMPORTANT - Cleaning and
maintenance').
You have to perform the Calc-Clean
process again (see chapter 'IMPORTANT
- Cleaning and maintenance').
Perform the Calc-Clean process regularly
(see chapter 'IMPORTANT - Cleaning
and maintenance').
Switch off the appliance. Then switch it
back on again. Turn the temperature dial
to the desired temperature setting
instead of CÁLC CLEAN. Let the iron
heat up until the 'iron ready' light lights up
steadily.
See chapter 'IMPORTANT - Cleaning and
maintenance'.
See chapter 'IMPORTANT - Cleaning and
maintenance'.
These water droplets are harmless.
If you want, you can wipe away the water
droplets with a dry cloth.
ENGLISH
9

Publicité

loading