Publicité
Les langues disponibles
Les langues disponibles
Basic accessories
GRIPPER
Gripper to make it easier to remove the food from the bowl.
Operating instructions
1. Open the lid and place the grill plate or stirring mechanism into the bowl container
before putting in the food. When placing the stirring mechanism into the container,
make sure that the insert locks in place correctly in the container. Push down the two
hooks.
2. Put the food in the bowl.
3. Keep the food about 15-20 mm from the bowl wall to allow maximum hot air circulation.
4. Close the lid by pushing on the release button. Make sure the food will not touch the top
of the lid.
5. Inset the power cord firmly into the wall AC main outlet.
6. Set your desired cooking time and temperature.
7. The timer will switch off after the preset time period has passed and a bell will sound
momentarily to alert you that the cooking time is over and the desired food to be cooked
and served.
8. Allow the device to cool down. Once it has completely cooled down, remove the stirring
mechanism* and the container from the device so that the device can be cleaned.
*the stirring mechanism can be removed by using your index finger and middle finger to
reach under the two hooks on the side of the release mechanism (on top of the stirring
mechanism). Press on the button in the middle with your thumb and at the same time
pull up with your index finger and middle finger. The release mechanism will release
itself and the stirring mechanism can then be removed.
9. Clean the container, stirring mechanism, turning ring and grill insert with hot water and
some mild detergent or in the dishwasher.
STIRRING MECHANISM
Stirring mechanism suitable for stirring chips and small size of food to
cook more even
GRILL PLATE AND TURNING RING
For baking, roasting, toasting meals like chicken, chicken wings, fish,
steak or other meats.
Publicité
