Issues And Solutions; Technical Information; Warranty - Oceanic OCEABV1300B Guide D'utilisation

ISSUES
No steam or
reduced steam jet
The appliance do
not switch on
Model
Adapter input
Power
IP (Ingress Protection) level
Autonomy
The warranty does not cover product wear parts, neither problems or damage resulting from:
(1) superficial damage due to normal wear of the product
(2) defects or damage due to contact of the product with food or liquids, and due to corrosion caused
by rust;
(3) any incident, abuse, misuse, modification, unauthorized removal or repair;
(4) any improper maintenance operation not in accordance with product instructions or connection to
improper voltage use;
(5) any use of accessories not supplied or approved by CONTINENTAL EDISON.
The warranty will be cancelled in case of elimination of the rating label and/or the serial number
product.
V. Issues and solutions
REASONS
Water tank may be empty
The appliance spout may be
clogged
The appliance is not properly
plugged in
The steam knob is not turned on
The steam knob is on the MIN
setting
The electric board is off / fuse is
grilled
Appliance is unplugged
The appliance fuse is broken
VI. TECHNICAL INFORMATION
OCEABV1300B
220-240V ~ 50Hz
1300W
IPX4
25min with steam low setting
18min with steam high setting
VII. WARRANTY
SOLUTIONS
Refill the water tank
Clean the spout
Unplug and replug the appliance
Turn on the steam knob
Turn the steam knob and set it on
the max level
Replace the fuse or restart the
electric board
Plug in the appliance
Contact the after sales service
13
ENGLISH