Using Your Appliance - Oceanic OCEABV1300B Guide D'utilisation

Installing the microfiber mop
Installing the carpet slider
1. Fill the tank: Open the tank cap (5) by turning it anti-clockwise. Fill the tank with 330ml of water using the
measuring cup.
The mop attaches easily to the cleaning head thanks to the pins on the latter. Just
put the mop on the floor and then put the head of your steam cleaner on the
microfibermop by pressing lightly.
Put the carpet slider on the carpet to be cleaned then insert the cleaning head into
the carpet slider. You can then proceed to the carpet clean steaming with the carpet
slider help.
B. Using your appliance
Insert the main body end into the N cleaning head until the
assembly is properly secured.
The cleaning head can be removed from the main body by
pressing the release button on the top of the head.
9
ENGLISH