Oceanic OCEABV1300B Guide D'utilisation page 28

ENGLISH
How to clean the inside of the water tank
To clean the lime scales that settles inside of the water tank, mix two tablespoons of white vinegar with the
water from the tank (full), close it, and shake. BE SURE THAT THE APPLIANCE IS TURNED OFF.
Procedure for cleaning scales:
If your appliance starts to produce a weaker steam jet than usual, it may need descaling. Scales may develop
over time on metal parts, and decrease its performance.
It is therefore necessary to remove scales regularly, every 25 or 50 uses, or even once a month, depending on
the hardness of the water and the frequency with which you use your device.
1 - Prepare a mixture: 1/3 of white vinegar and 2/3 of still water, and pour into the tank.
2 - Orient your device to a position where the vapor can escape freely, without touching the ground or other
surfaces. Plug in the device, and turn it on by pressing the power button. Then produce steam, so that the
cleaner mixture circulates in the device.
Continue to steam until the steam jet returns to normal.
3 - Refill the tank with water only, and produce steam until the tank is empty, to rinse.
WARNING
Do not leave the appliance unattended during the cleaning phase or while it is running.
Perform a test on an isolated and suitable area, after each cleaning, to ensure that no residue remains inside.
Cleaning the accessories:
You may notice, over time, that less and less steam comes out of your appliance accessories during use due to
the high mineral content of your water.
This may be due to the calcium that settles and accumulates in the beak of your device.
How to clean calcium deposits?
We recommend the use of a lubricating spray. Spread one or two lubricant pressures inside the mouthpiece
nozzle and inside the accessory. Then fill the water tank, plug the faulty accessory, and turn on the device. Then
send a jet of continuous steam, following the precautions for use, through the faulty accessory, for several
minutes to remove deposits. Once the walls have been cleaned, perform a test on an isolated and suitable area,
to ensure that no residue remains inside.
Do not try to repair this unit yourself. Any maintenance requiring disassembly must be performed by a qualified
technician.
Cleaning the microfiber mop:
- Machine washable. Use of mild detergent strongly recommended.
- For best results, let the mop lay flat.
- IMPORTANT: Allow the unit to cool before performing any maintenance or detection of a problem.
IMPORTANT: Never use JAVEL or equivalent products to clean the microfiber cloth.
WARNING: Do not use any toxic, solvent, industrial or harsh cleaning
products to avoid damaging your appliance.
12