Jeulin IRIO MS Mode D'emploi page 13

Microscopy
Microscopes IRIO MS / ES / EPS / EPSA
Ref : 571 210 - 571 211
571 212 - 571 261
Place the key in the flat plate zones.
Flat plate zone
to place the key
ENGLISH
Change the eyepiece:
Unscrew the
firmly maintaining the key with
your other hand. You can use a
latex glove or a cut piece of
sheet rubber.
4.4 Objectives
Can only be disassembled with the provided key. These objectives will be
protected from deterioration, dust and theft.
Each microscope is delivered with achromatic objectives x4, x10 and x40
(retractable) on turret I 4 places. Magnifying power range x40 to x400 with the
provided eyepiece x10.
Optional: objectives x60 (retractable)
Ref. 574 246 and x100 (retractable,
immersion) Ref. 574 247.
Change the objective:
Place the key on the ring openings
opposite the flat plate zones on the
objective. Unscrew the objective.
4.5 Focussing - Stop
The helical type macrometric movement D replaces the toothed bar and
guarantees your comfort: no sustainance and wear. WITHOUT A TOOTHED
BAR you are now freed from the sustainance and maintenance of the
macrometric movement.
Recommended position of use:
11
eyepiece while
Flat plate zone
to place the key