Hardware Overview; Hardware Installation - D-Link AirPremier N PoE DAP-2360 Guide D'installation

2. Hardware Overview

LAN - Solid light when the Ethernet port is connected
to a working port, such as a router or switch. The light
will blink when there is traffic through LAN port.
2.4 GHz - When lit, the access point is operating at
2.4GHz. This light will blink when there is wireless
traffic.
POWER - The light will blink during boot up. Once solid, the access point is ready.

3. Hardware Installation

Antennas
RESET
LAN(PoE)
5V 2.5A
Power Receptor
LAN Port (PoE)
Reset
3
D-Link DAP-2360 Quick Install Guide