About This Guide; Optional Accessories; Hardware Overview; System Requirements - D-Link DBA-3620P Guide D'installation Rapide

About This Guide

This installation guide provides basic instructions
for installing the DBA-3620P Nuclias Cloud-
Managed Wave 2 Outdoor Access Point on your
network. For additional information about how
to use the Access Point, please see the User
Manual, which is available on the D-Link support
website.
Before You Begin
This installation guide provides instructions
for installing the DBA-3620P on your network.
Additional documentation is also available on the
D-Link support website.
• D-Link Nuclias User Manual: For additional
information and instructions on how to
configure the device using D-Link Nuclias
Cloud.

System Requirements

Windows , Macintosh
-
®
operating system
Ethernet port or installed Ethernet adapter
-
Internet Explorer 11, Safari 7, Firefox 28,
-
Google Chrome 33 or higher

Unpacking the Product

Open the shipping carton and carefully unpack its
contents. Please consult the packing list below to
make sure all items are present and undamaged.
If any item is missing or damaged, please contact
your local D-Link reseller for a replacement.
DBA-3620P Nuclias Cloud-Managed Wave 2
-
Outdoor Access Point
Shielded Cat 5E Ethernet Cable
-
Mounting Ties (Qty. 2)
-
Wall Mount Base
-
Console Cable
-
- Grounding Wire
Note: To power the DBA-3620P, please use any
D-Link IEEE 802.3at/af-compliant PoE switch or
the D-Link DPE-311GI PoE injector.
2  D-Link DBA-3620P Quick Installation Guide
, or Linux-based
®

Optional Accessories

PoE Injector (Model: DPE:311GI)
-
Note: These accessories are not included in
the package. If any of these items are required,
please contact your reseller to order it.

Hardware Overview

LEDs
Figure 1. DBA-3620P LEDs
LED Status
Power/ Solid Orange Device is performing
Cloud
Blinking
Orange
Solid Green
Blinking
Green
Solid Red
LAN Solid Green
(PoE in)
Blinking
Green
Light Off
WLAN Solid Green
(2.4GHz
Blinking
/5 GHz)
Green
Light Off
Description
startup procedure
Device is resetting to
its default settings
or it is upgrading its
firmware
Device is currently in
cloud mode
Device is trying to
connect to D-Link
Nuclias Cloud
Device is not working
properly in cloud
mode
Link Present
Sending or receiving
data packets
Link down or
unplugged
Device Ready
Sending or receiving
packets
Radio off/ device is
undergoing boot
process