Publicité
Les langues disponibles
Les langues disponibles
To avoid water leak failures, the connection
between the extension hose and the drain
hose of the product must be fitted well with an
appropriate clamp as not to come off and leak.
Adjusting the feet
In order to ensure that the product operates
A
more silently and vibration-free, it must stand
level and balanced on its feet. Balance the
machine by adjusting the feet. Otherwise, the
product may move from its place and cause
crushing and vibration problems.
Loosen the lock nuts on the feet by hand. Adjust
the feet until the product stands level and balanced.
Tighten all lock nuts again by hand.
Do not use any tools to loosen the lock nuts.
A
Otherwise, they will get damaged.
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the values in
the "Technical specifications" table. Our company
shall not be liable for any damages that will arise
when the product is used without grounding in
accordance with the local regulations.
• Connection must comply with national
regulations.
• Power cable plug must be within easy reach
after installation.
• The voltage and allowed fuse or breaker
protection are specified in the "Technical
specifications" section. If the current value of
the fuse or breaker in the house is less than 16
Amps, have a qualified electrician install a 16
Amp fuse.
• The specified voltage must be equal to your
mains voltage.
• Do not make connections via extension cables
or multi-plugs.
Damaged power cables must be replaced by
B
the Authorized Service Agents.
First use
Before starting to use the product, make sure
that all preparations are made in accordance
with the instructions in sections "Important safety
instructions" and "Installation".
To prepare the product for washing laundry,
perform first operation in Cotton-90 programme.
Before starting the programme, put max. 100
g of powder anti-limescale into the main wash
detergent compartment (compartment nr. II). If the
anti-limescale is in tablet form, put only one tablet
into compartment nr. II. Dry the inside of the bellow
with a clean piece of cloth after the programme has
come to an end.
Use an anti-limescale suitable for the washing
C
machines.
Some water might have remained in the
C
product due to the quality control processes in
All manuals and user guides at all-guides.com
Disposing of packaging material
Packaging materials are dangerous to children.
Keep packaging materials in a safe place away
from reach of the children.
Packaging materials of the product are
manufactured from recyclable materials. Dispose of
them properly and sort in accordance with recycled
waste instructions. Do not dispose of them with
normal domestic waste.
Transportation of the product
Unplug the product before transporting it. Remove
water drain and water supply connections. Drain
the remaining water in the product completely;
see, "Draining remaining water and cleaning the
pump filter". Install transportation safety bolts
in the reverse order of removal procedure; see,
"Removing the transportation locks".
C
Disposing of the old product
Dispose of the old product in an environmentally
friendly manner.
Refer to your local dealer or solid waste collection
centre in your area to learn how to dispose of your
product.
For children's safety, cut the power cable and break
the locking mechanism of the loading door so
that it will be nonfunctional before disposing of the
product.
3 Preparation
Things to be done for energy saving
Following information will help you use the product
in an ecological and energy-efficient manner.
• Operate the product in the highest capacity
• Always follow the instructions on the detergent
• Wash slightly soiled laundry at low
• Use faster programmes for small quantities of
• Do not use high temperatures for laundry that is
• Do not use detergent in excess of the amount
Sorting the laundry
• Sort laundry according to type of fabric, colour,
• Always obey the instructions given on the
Preparing laundry for washing
• Laundry items with metal attachments such as,
• Take out all substances in the pockets such as
4 - EN
the production. It is not harmful for the product.
Never move the product without the
transportation safety bolts properly fixed in
place!
allowed by the programme you have selected,
but do not overload; see, "Programme and
consumption table".
packaging.
temperatures.
lightly soiled laundry.
not heavily soiled or stained.
recommended on the detergent package.
and degree of soiling and allowable water
temperature.
garment tags.
underwired bras, belt buckles or metal buttons
will damage the machine. Remove the metal
pieces or wash the clothes by putting them in a
laundry bag or pillow case.
Publicité
