Seac Partner Manuel De L'utilisateur page 16

CARE AND MAINTENANCE
• Keep the watch clean and dry. Do not expose it to chemical agents, including
alcohol.
Use only fresh water to clean the watch, and remove all salt residue. Leave it
to air dry naturally; do not use jets of hot or cold air.
• Do not expose it directly to the sun or to sources of heat above 50°C. Store it
in a cool (5°C - 25°C) and dry place.
• Do not attempt to open it, modify it, or repair it yourself. Always contact an
authorized service center.
• The instrument is designed for a reading accuracy of +/- 2%. European
standards require that this unit be checked periodically for its accuracy in its
readings, depth, and time. The degree of accuracy required by the European
standards is +/- 3.5%.
• This product is manufactured to withstand use in seawater, but after the
dive you must rinse it thoroughly in fresh water and not expose it to direct
sunlight or sources of heat to dry it.
• Check that there are no signs of humidity inside the display.
Note:
• To change the battery safely, we recommend that you always contact an
authorized SEAC center.
16