Omron Micro Air NE-U22V Guide D'utilisation page 8

How to Assemble the Main Unit
This unit must be assembled before it is used.
– Parts may fit tightly since they are made to prevent the medication from leaking.
– You must wash and disinfect all removable parts before using the unit.
Assemble the unit after washing, disinfecting, and drying.
(For how to disinfect the unit, refer to Page 18)
General Advice
• Hold the unit securely with both hands.
• Install the parts securely. (You may hear clicks depending on the parts
at the time of installation.)
1
Attach the Mesh Cap on the Medication Bottle.
Insert the
Mesh Cap
vertically.
2
Attach the Medication Bottle to the Main Unit.
Align both
electrodes with
each other.
Close it
securely.
8
You have finished
installation.
Do not open the
bottle cap.
You have finished
installation.