Maintenance And Service; Maintenance And Cleaning - Bosch PEX 400 A Notice Originale

22 | English
Application Table
The data in the following table are recommend-
ed values.
The most favourable combination for working is
best determined by practical testing.
Roughening
varnish
Touching up
varnish
Removing
varnish
Softwood
Hardwood
Veneer
Aluminium
Steel
Derusting steel
Stainless steel
Masonry, stone
1 609 929 M11 | (28.9.07)
180/320 2/3
120/400 4/5
40/80 5 medium
40/240 5/6 medium
60/320 5/6 medium
2 – 4
240/320
80/240 4/5 medium
60/240 5 medium/
40/120 6
120/240 5 medium
80/200 5/6

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and ventilation slots clean.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
soft
hard
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it
must be disposed of safely.
soft
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
hard
centre for Bosch power tools.
soft
In all correspondence and spare parts order,
please always include the 10-digit article
hard number given on the type plate of the machine.
Bosch Power Tools