auna Columbia Mode D'emploi page 24

EN
24
All manuals and user guides at all-guides.com
AUTOMATIC TUNING
1. During FM working mode, press the MENU BUTTON (4), then press
skip+ and skip- knob until select the "SCAN SETTING"
2. Press the SCAN BUTTON (7) and the unit will scan all of the FM stations.
3. RADIO DATA SYSTEM INFORMATIONS
4. During FM working mode, press the INFO BUTTON (6) to display the
following informations : PROGRAM TYPE/PROGRAM NO/AUDIO
BITRATE/TIME/DATE.
FM & FM-Stereo Reception
Stereo reception is possible when the tuned FM station is broadcasting in
stereo.
Press the MENU BUTTON (4) until select "AUDIO SETTING", then press the
skip+ and skip- knob and t select between FORCED MONO or STEREO
ALLOWED.
DAB RADIO
1. Turn the source BUTTON (2) to select DAB mode.
2. Extend the DAB antenna at the back of the unit.
AUTOMATIC TUNING
1. Press the MENU BUTTON(4), then press skip+ and skip- knob to select
FULL SCAN.
2. Press the enter to start searching the DAB / DAB+ station.
MANUAL TUNING
1. Press the MENU BUTTON (4), then press skip+ and skip- knob to select
MANUAL TUNE.
2. Press the skip+ and skip- knob to tune manually the desired station.
3. When tuned a DAB stereo station, the "stereo" will show on the LCD.
4. During DAB reception, press the INFO BUTTON (6) to see the
information of the playing DAB station on the display, i.e Program Type
/ Program No. / Frenquency /Range / Signal Strength / Time / Date.
PRESET MEMORY DAB / DAB+
1. When selected the desired station, press and hold the PRESET BUT-TON
(11) for 2 seconds.
2. The display show "Preset Store 1: (Empty)". Press the skip+ and skip-
knob , then press the skip+ and skip- knob store the station