Bushnell GOLF TOUR V6 Mode D'emploi page 5

HOW TO USE SLOPE +/-™ (TOUR V6 SHIFT ONLY)
Move the Slope switch to the "Slope On" position. A second row of information appears in the display, confirming that
you are now in slope mode. Next, press the Power/Fire button to obtain the distance to the flag or other objects. Once
the range is displayed, release the Power/Fire button. Once the Power/Fire button is released, the grade percentage and
compensated range will be displayed beneath the standard distance in the second row of numbers.
For example, if the true distance is 160 yards, but with a slope of +6 percent, the Slope compensated
("play-as") range is 168 yards. The display would show this (right):
THE ADVANTAGE OF SLOPE +/-™ (TOUR V6 SHIFT ONLY)
The distance to the black flag in the drawing (see below) is 160 yards. It is also 160 yards to the red flag, although it is on a
slope with a 6% grade (uphill incline). However, if a golfer were to play this hole as 160 yards, the ball (X) would fall short
of the hole/flag if slope was not taken into account. Therefore, due to the slope, it should be played as a 168 yard shot.
This distance displays the "play as" distance below the line of sight distance.
X
6%
160 YARDS
SETTING DISTANCE UNITS (Y OR M) & JOLT PREVIEW
To set the distance between Yards or Meters, press Fire/Power to turn the unit on, then press and hold the Mode button
until the display blinks. Press the Mode to switch from Y (yards) or M (meters). Press Fire/Power button to set the distance
units.
This action initiates JOLT (vibration and visual ring in display), allowing you to preview/demo the effect of JOLT Technology
without requiring you to fire the laser at a target.
USING PINSEEKER™ WITH VISUAL JOLT®
Bushnell's exclusive Pinseeker™ feature allows reliable flag targeting without inadvertently getting distances to large
background targets (i.e., trees, club houses, etc.) with stronger signal strength.
When ranging your target, if the laser beam recognizes more than one object (i.e., the flag and a group of trees behind
it), only the distance to the closest object (the flag) will be displayed. The JOLT Technology provides two short bursts of
vibration to confirm that the distance displayed is to the flag, and the red ring (Visual JOLT Indicator) around the outer
edge of the display is activated, confirming the laser has ranged the correct target via Pinseeker.
Occasionally, the laser will only see one object in its path. In this instance, JOLT will not signal.
Tip: While pressing the Power/Fire button, you can move the device slowly from object to object and intentionally force the laser to hit
multiple objects to ensure that you are only displaying the closest of the objects recognized by the laser. Once the device has shut off,
the unit will always default to the last mode used.
5
Click to Return to the Table of Contents