Philips AVENT SCF355 Manuel D'utilisation page 9

Using the bottle warmer with express milk warming setting
1
Put the mains plug in the wall socket. Place a bottle in the bottle warmer.
2
Fill the bottle warmer with drinking water up to the level of the milk in
the bottle. In case of large amounts of milk, the maximum level of water is
approximately 1 cm below the top of the bottle warmer. An accurate water level
ensures correct warming performance.
3
Select the desired setting based on the milk volume. See the express warming
reference table at the end of this chapter to check how long the milk needs to be
warmed in the selected setting.
Note
• The speed of warming milk depending on the amount of the milk warmed and on its initial
temperature, i.e. room temperature (
1 cm
22 °C
) or fridge temperature (
- English 7 -
5° C
).