Publicité
Les langues disponibles
Les langues disponibles
iii. Forward Facing
Installation
see images
-
22
25
!
The child restraint can not be used if
the vehicle safety belt buckle (female
buckle end) is too long to anchor the
child restraint securely.
-1
22
Note
1. Please adjust the shoulder
harnesses to proper height
(slightly above the child's
shoulder) before installing the
child restraint.
2. Please adjust the child restraint
to proper angle (3 positions for
forward facing mode). Angle
indication: with top red artwork
align with bottom reclining
position indicator, as
21
3. When installing and adjusting the
safety belts, make sure that both
the shoulder belt and the waist
belt are not twisted and will not
keep the safety belts from being
properly positioned.
13
22
1
23
While pressing the child restraint,
pull the belts to fasten the child
restraint tightly and securely.
!
Please check by moving the
child restraint back and forth.
!
Shoulder belt passes through
Lock-off Device, confirm the
Lock-off Device is pushed
down, as
23
!
The vehicle buckle tongue is
engaged with the buckle
correctly, as
22
iv. Securing your Child in
the child restraint
see images
-
26
27
Note
1. When installing the child restraint
in the forward facing mode, DO
NOT use the small seat pad.
2. Please install the child restraint on
the vehicle seat, and then put the
child in the child restraint.
3. After the child is placed into the
child restraint, check whether the
shoulder harnesses are at proper
height.
24
24
25
14
Publicité
