Publicité
Les langues disponibles
Les langues disponibles
iii. Rearward Reclining
Angle Adjustment
see images
14
While pushing the reclining adjust-
ment handle
-1, pull the child
14
restraint from the first position to the
last position.
-2
14
Angle indication: with top blue
artwork align with bottom reclining
position indicator, as
8
iv. Rearward Facing
Installation
see images
-
15
18
Note
1. Make sure the shoulder harness
is adjusted to proper height before
installing this child restraint.
2. First adjust the angle of the child
restraint to the last position. Angle
indication: with top blue artwork
align with bottom reclining
position indicator, as
8
3. When installing and adjusting the
safety belts, make sure that both
the shoulder belt and the waist belt
are not twisted and will not stop
the safety belts from functioning
properly.
!
The child restraint can not be
used if the vehicle safety belt
buckle (female buckle end) is
too long to anchor the child
restraint securely.
-1
15
9
14
1 1
15
1
1. Fasten the belts in the a rearward
blue safety-belt slots at the back
of the body.
16
!
Shoulder belt must pass through
the rearward safety-belt slot.
2. Open the lock-off device and
insert the safety belt through it.
3. While pressing the child restraint,
pull the belts to fasten the child
restraint tightly and securely.
!
Please check by moving the
child restraint back and forth.
!
Shoulder belt passes through
the rearward safety-belt slots,
as
-1
18
!
Shoulder belt passes through
Lock-off Device, confirm the
Lock-off Device is pushed
down, as
-2
18
18
16
17
17
1
1
2
2
10
Publicité
