Assembly Of The Saw Attachment - Husqvarna X-Série Manuel D'utilisation

Assembly of the saw attachment

(327P5)
Assembly
• Loosen the coupling by turning the knob.
• Align the tab of the attachment (A) with the arrow on
the coupling (B).
B
• Push the attachment into the coupling until the
attachment snaps into place.
• Before using the unit, tighten the knob securely.
Dismantling
• Loosen the coupling by turning the knob (at least 3
times).
1156923-32 Rev. 1 2014-05-21
ASSEMBLY
A
• Push and hold the button (C). While securely holding
the engine end, pull the attachment straight out of the
coupling.
–
English 49