Télécharger Imprimer la page

Hinkley 27 Bryce Manuel D'instructions page 18

Ventilateur intérieur à del

Publicité

Les langues disponibles

Les langues disponibles

SMART BY BOND (SOLD SEPARATELY)
HINKLEY SMART FAN OPTIONS:
In addition to the included wall control, you can control your Hinkley
fan thr oug h the Bond app .
• To use the app, download it for free from the App Store or Google
Play .
• Open the app to cr
eate y our acco unt. You c an als o log in with
your F acebook or Goog
le acco unt.
• Nex t, s et u p a W iFi connection. Y ou will need the SSID and W
p assw ord f or the net work y ou w an t to connect to .
• You will receiv e a pr ompt to choos e the finish of y our fan and
name y our fan device .
• The app wil l wal k y ou thr oug h the main s creen and sho w y ou
ho w to change f an speeds, d
im the l ig ht, s et timer s or util ize
breeze mode .
NOTE: Maximum of 2 f ans c an oper ate on a cir cuit thr oug h the
wal l con trol. Maxim um of 12 f ans c an oper ate on a cir cuit thr oug h
an on/o˛ switch or br
eak er when util izing the app f or the f an
con trol (witho ut the w al l con trol in the cir cuit ).
How to correct "Fan paired to wrong transmitter" on Smart by
Bond fans supporting multiple transmitters:
• Smart Phone Method (recommended)
a) Open the Bond Home app.
b) Tap on the Fan you want to modify.
c) Tap the settings icon in the upper right corner.
d) Scroll down and tap "Manage Remotes".
e) Delete just the remotes in question; or, use the triple-dot menu
and select "Forget all remotes".
f) Tap "Learn a new remote".
g) Follow on-screen prompts to (re) learn the desired remotes into
the fan.
• Factory Reset Method
a) Turn mains power OFF to all fans.
b) Turn mains power ON only for the fan needing code correction.
c) Within 15 seconds of turning on, hold down the Speed 1 button
on any compatible transmitter for 20 seconds.
d) The fan light should blink 5 times and may spin up on low speed
for 10 seconds.
e) Wait 10 seconds.
f) Hold down the Power button on the transmitter you wish to pair.
The fan light should flash three times and the motor spin up for
10 seconds on low speed.
g) If you were using the fan on Wi-Fi, you will need to reconnect to
Wi-Fi.
• Brute Force Method
a) Turn mains power OFF to the fan.
b) Turn mains power back ON on the fan.
c) Hold down the Power button on the transmitter for 5 seconds,
iFi
until the fan light flashes 3 times.
d) Repeat steps a--c above 4 more times.
e) The fan's memory is now totally overwritten, and it has forgotten
all other remotes.
https://bond home .io/app
16
| hinkley.com |
©2019 Hinkley Lighting, Inc.

Publicité

loading