Starting The Oven; Description Of Control Panel Components - Diamond Fvs-423 Manuel D'instructions

EN

4.1 STARTING THE OVEN

Switch on the water interception valves and the protection electric switch, installed upstream.
Press the ON/OFF key and wait few seconds for the lighting of the display.
ATTENTION!
Turning the oven off through the button ON/OFF does not interrupt the power supply to
the electronic boards.
If the oven is not used we advise you to switch off electric power supply using the protec-
tion switch upstream.

4.2 DESCRIPTION OF CONTROL PANEL COMPONENTS

A ON/OFF button
B Convection mode selection button with humidification adjustment
C Steam mode selection button
D Cooking chamber temperature selection button
E Humidification percentage selection button
F Cooking time selection button
G Core probe selection button
H Temperature/humidity display
H1 H Display value increasing button
H2 H display value decreasing button
L Time/core probe display
L1 L Display value increasing button
L2 L Display value decreasing button
M Cooking chamber lighting button
N
Set values visualization button
P
Autoreverse selection button
R
Fan speed selection button
S
Cooking/washing cycle starting button
T
Fast cooling button
W Automatic washing selection button
4